NetModule NB3000-Line-Hd, Руководство пользователя

Страница: 60 / 225

NB3000-Line-Hd User Manual 4.2
When running in WAN mode, the interface may be configured with the following settings:
Parameter WAN IP Settings
WAN mode The WAN operation mode, defines whether the interface
should run as DHCP client, statically configured or over PPPoE.
MTU The Maximum Transmission Unit for the interface, if provided
it will specify the largest size of a packet transmitted on the
interface.
When running as DHCP client, no further configuration is required because all IP-related
settings (address, subnet, gateway, DNS server) will be retrieved from a DHCP server in the
network. You may also define static values but caution has to be taken to assign an unique
IP address as it would otherwise raise IP conflicts in the network.
PPPoE is commonly used when communicating with another WAN access device (like a DSL
modem). The following settings can be applied:
Parameter PPPoE Configuration
User name PPPoE user name for authenticating at the access device
Password PPPoE password for authenticating at the access device
Service name Specifies the service name set of the access concentrator and
can be left blank unless you have multiple services on the
same physical network and need to specify the one you want
to connect to.
Access concentrator
name
The name of the concentrator (the PPPoE client will connect to
any access concentrator if left blank)
51