NetModule NB3000-Line-Hd, Руководство пользователя

Страница: 44 / 225

NB3000-Line-Hd User Manual 4.2
as one that contains numbers, letters and punctuation characters). The password shall have
a minimum length of 6 characters. It shall contain a minimum of 2 numbers and 2 letters.
Figure 5.1.: Initial Login
Please note that the admin password will be also applied for the root user which can be
used to access the device via the serial console, telnet, SSH or to enter the bootloader. You
may also configure additional users which will only be granted to access the summary page
or retrieve status information but not to set any configuration parameters.
A set of services (USB Autorun, CLI-PHP) are by default activated in factory state and will be
disabled as soon as the admin password has been set. They can be enabled again afterwards
in the relevant sections. Other services (SSH, Telnet, Console) can be accessed in factory
state by providing an empty or no password.
5.1.2. Recovery
Following actions might be taken in case the router has been misconfigured and cannot be
reached anymore:
1. Factory Reset: You can initiate a reset back to factory settings via the Web Manager,
by running the command
factory-reset
or by pressing the reset button. The latter
would require a slim needle or paper clip which must be inserted into the hole .
The button must be hold pressed for up to 5 seconds until all LEDs flash up.
2. Serial Console Login: It is also possible to log into the system via the serial port. This
would require a terminal emulator (such as PuTTY or HyperTerminal) and an RS232
35