NB3000-Line-Hd User Manual 4.2
If the tunnel is operated in client mode, the following settings can be applied:
Parameter
OpenVPN Client Configuration
Peer selection
Specifies how the remote peer shall be selected, besides a sin-
gle server you may configure multiple servers which can, in
case of failures, either be selected sequently (i.e. failover) or
randomly (i.e. load balancing)
Server
The address or hostname of the remote server
Port
The port of the remote server (1194 by default)
The following settings can be used to configure a tunnel:
Parameter
OpenVPN Configuration
Interface type
The device type for this tunnel which can be either TUN (typi-
cally used for routed connections) or TAP (required for bridged
networks)
Protocol
The tunnel protocol to be used for the transport connection
Network mode
Defines how the packets should be forwarded, which can be
either routed or bridged from/to a particular LAN interface. If
required, you can also specify the maximum transfer unit for
the tunnel interface.
MTU
The Maximum Transmission Unit of the tunnel interface
Encryption
The required cipher mechanism used for encryption
Digest
The digest algorithm used for authenticating
Authentication can be done in the following ways:
Parameter
OpenVPN Authentication
certificate-based
Certificates and keys for authenticating the tunnel. Please take
care that the proper keys/certificates have been either up-
loaded or generated (see
credential-based
Username and password are used for authentication.
both
Verifying the tunnel uses certificates and credentials.
none
Tunnel is not authenticated (discouraged)
99
Содержание NB3000-Line-Hd
Страница 15: ...3 Speci cations 3 1 Appearance 6...
Страница 106: ...NB3000 Line Hd User Manual 4 2 5 6 VPN 5 6 1 OpenVPN OpenVPN Administration Figure 5 28 OpenVPN Administration 97...
Страница 186: ...NB3000 Line Hd User Manual 4 2 5 9 LOGOUT Please use this menu to log out from the Web Manager 177...