Netkrom AIRNET 11Mb CPE BRIDGE Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 34

Netkrom AIRNET 11Mb CPE BRIDGE Скачать руководство пользователя страница 7

Pag 3

Section 2: Before You Begin

Verify Contents of Installation Kit

Take a moment to ensure you have all of the following parts in your Netkrom CPE Unit installation kit before you
begin installing the CPE. If any parts are missing, please contact Netkrom at 305-4182232

CPE BRIDGE ONLY

CPE BRIDGE POINT TO POINT KIT

1. AIRNET CPE Bridge Unit
2. Antenna Mounting bracket (include: stainless

steel U-Bolts, Flange Nuts, and saddle
clamps)

3. PoE Injector with 100-240v Power supply
4. Product

CD

1. (02) AIRNET CPE Bridge Unit
2. (02) Antenna Mounting bracket (include:

stainless steel U-Bolts, Flange Nuts, and
saddle clamps)

5.  (02)Wall Mount Bracket
3.   (02)PoE Injector with 100-240v Power supply
4.  (02)75’ UTP Cat5 Outdoor Cable
5. (02)Product

CD

Tools and Hardware Needed

The following tools will be needed to assemble and mount your CPE:

  Crescent wrench, channel locks, or a small pipe wrench
  Phillips head screw driver
  Pipe and other hardware on which to mount the CPE (See Mount the CPE on page 6 for illustration.)
  Cable ties and other hardware with which to secure the exterior Cat 5 cable to the CPE and building (See

Secure the CPE and Cable on page 9 for illustration.)

«
...
5
6
7
8
9
...
»

Содержание AIRNET 11Mb CPE BRIDGE



































Отзывы:

Нет отзывов