manualshive.com logo in svg

Netkrom AIRNET 11Mb CPE BRIDGE, Руководство по установке, Страница: 31 / 34

Поделиться
Скачать
Netkrom AIRNET 11Mb CPE BRIDGE Скачать руководство пользователя страница 31

 

 

 

SNMP Setup 
 
Server 

 

Click the radio button to enable/disable the SNMP 
server.  You have to enable this function first to set the 
following settings.   

Trust Host IP 

 

Enter the IP address of the 

NMS

 (Network Monitoring 

Stations). The NMS is the only host PC that is allowed to 
access this AP. If this filed is left blank, it means that 
every host PC is allowed to access the AP if only its  
“Community string” is correct.  

Trust Trap IP 

 

Enter the IP address of the SNMP Trap Receiver. Leave 
it blank to disable the SNMP trap function.   

Agent Port 

 

Enter the SNMP listening port.   

Read Community 

 

Enter the communicty string for the NMS to read only this 
AP’s MIB.   

Write/ReadCommunity 

 

Enter the communicty string for the NMS to read/write this 
AP’s MIB.   

Trap Port 

 

Enter the remote Trap Receiver port.   

Trap Community 

 

Enter a trap community string that is used as a 
password for the Trap Receiver.    

Trap Version 

 

SNMP Trap version 1 and 2 are both supported. Select your 
preference.   

 
Trap Activity 
 
Sent on redirect  

 

Send a trap to the Trap Receiver (already defined in the 
TrustTrap IP) when a station (wireless client) is redirected to 
the default web site.   

Sent on Auth Success (Authorization 
success)  

 

Send a trap to the Trap Receiver (already defined in the 
Trust Trap IP) when a station (wireless client) gets 
authorization from the 802.1x server (or RADIUS server).  

Sent on Auth Failure (Authorization failure) 

 

Send a trap to the Trap Receiver (already defined in the 
Trust Trap IP) a wireless client fails to get authorization from 
the 802.1x server (or RADIUS server).   

Sent WEP key failure  

 

Send a trap to the Trap Receiver (already defined in the 
Trust Trap IP) when a wireless client fails to associate to the 
AP because of wrong WEP keys.   

Sent on acct failure  

 

Send a trap to the Trap Receiver (already defined in the 
Trust Trap IP) when the accounting server of a wireless 
client is invalid or fails.   

Sent on boot 

 

Send a trap when the AP has booted.   

Sent on reboot 

 

Send a trap when the AP is asked to reboot itself.   

Sent on web start 

 

Send a trap once the AP web server is ready for use.   

 
 
 
 
 
 
 

Pag 27 

Содержание AIRNET 11Mb CPE BRIDGE



































Отзывы:

Нет отзывов