Netkrom AIRNET 11Mb CPE BRIDGE, Руководство по установке, Страница: 13 / 34

Pag 9
Aim the CPE
You will need to aim the Netkrom CPE Unit directly at the Base Station or remote antenna to achieve maximum
data speed. Do the following to aim the CPE:
1. Make sure the CPE is loosely mounted, the exterior Cat 5 cable is connected to the CPE the exterior Cat
5 cable is plugged into the ANT side of the PoE Injector, and the PoE Injector is plugged in.
Note : You do not need to plug the Interior Cat 5 cable into your PC network interface card to aim the
CPE, but you must have the Cat 5 cable connected to the PoE Injector and the PoE Injector plugged in
for your CPE to acquire the signal from the base station antenna.
2. Locate the base station antenna and aim your CPE directly toward it.
Secure the CPE and Cable
Do the following to secure the CPE and cable:
1. When you have completed aiming the CPE, tighten the CPE mounting bracket securely so the CPE
won’t move in the wind or other weather.
2. Secure the Cat 5 cable the mounting pipe or other support using wire ties or other suitable hardware.
Regular Cable