Netkrom AIRNET 11Mb CPE BRIDGE Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 34

Netkrom AIRNET 11Mb CPE BRIDGE Скачать руководство пользователя страница 29

Web Redirection

If “Web Redirection” is enabled, unauthorized clients associating to this AP will be re-directed to the specified
“Redirection URL” when they are trying to access the Internet.

Web Redirection

Click the “

Enable/Disable

” radio button to enable/disable the

function of “Web Redirection”.

Redirection URL

This URL (Universal Reference Locator) must be a complete
one, which means you can not leave out URL protocol -

http://

before the full domain name, i.e. http://www.mycompany.com.
Or the web redirection will not work properly.

Open Address 1

The IP address for the URL you entered in the previous field.

Open Address 2

The IP address for your ISP’s DNS.

Open Address 3

Open Address 4

Other open IP address allowed to be connected to.

Apply Change

Press to save the new settings on the screen.

Reset

Press to discard the data you have entered since last time you press
Apply Change.

DHCP Relay

The DHCP Relay Agent that relays Dynamic Host Configuration Protocol (DHCP) messages between DHCP
clients and DHCP servers on different IP networks. The DHCP Relay Agent is compliant with RFC 1542,
"Clarifications and Extensions for the Bootstrap Protocol." For each IP network segment that contains DHCP
clients, either a DHCP server or a computer acting as a DHCP Relay Agent is required.

Pag 25

«
...
27
28
29
30
31
...
»

Содержание AIRNET 11Mb CPE BRIDGE



































Отзывы:

Нет отзывов