Netkrom AIRNET 11Mb CPE BRIDGE, Руководство по установке, Страница: 17 / 34

Pag 13
System
Alias Name You can assign a unique name to this Access Point. The alias name is
especially important for identification when there are more than one
Access Point is applied in a network.
Uptime The time period since the device was up.
Firmware Version The current version of the firmware installed in this device.
Wireless Configuration
Wireless Mode There are four modes supported, Access Point, Client (Ad-hoc and
Infrastructure), and Bridge . The default mode is Access Point . If you
want to change to bridge mode, please go to Wireless/WDS Setting to
enable the WDS function.
SSID Sensitive and must not exceed 32 characters. A device will not be
permitted to join the BSS unless it can provide the unique SSID. An
SSID is also referred to as a network name because essentially it is a
name that identifies a wireless network.
Channel Number : The number of channels supported depends on the region of this Access
Point. All stations communicating with the Access Point must use the
same channel.
Encryption WEP Encryption (Wired Equivalent Privacy) is set to Disabled by
default. When WEP is enabled, data packet is encrypted before being
transmitted. The WEP prevents data packets from being eavesdropped
by unrelated people. By using WEP data encryption, there may be a
significant degradation of the data throughput on the wireless link.
Associated Clients Displays the total number of clients associated to this AP. You can have
up to 64 clients to associate to this Access Point.
BSSID BSSID displays the ID of current BSS, which uniquely identifies each
BSS. In AP mode, this value is the MAC address of this Access Point.
TCP/IP Configuration
IP Protocol
Display the method to get the IP of this AP, which could be
obtained by Fixed-IP or DHCP-client.
br0 IP Address
Current IP address for this Access Point
br0 Subnet Mask Current Subnet mask for this Access Point
br0 Default Gateway Default Gateway for this Access Point
br0 MAC Address The MAC Address for this Access Point
System Log
This page display log events with time when events happened, log events’ types, log sources and the description
for events themselves. System manager can use the system log to trace when problems occur.