Manage the Extender Network and Security Settings
46
N600 WiFi Range Extender
Wireless mode
From the
Wireless mode
menu, select one of the following modes:
•
Up to 54 Mbps
. Legacy mode. This mode allows 802.11n, 802.11g, and
802.11b devices to join the network but limits 802.11n devices to function at
up to 54
Mbps. If your network security is WEP or WPA-PSK [TKIP], you must
use the Up to 54
Mbps mode.
•
Up to 145 Mbps
. Neighbor-friendly mode for reduced interference with
neighboring wireless networks. This mode allows 802.11n, 802.11g, and
802.11b devices to join the network but limits 802.11n devices to function at
up to 145
Mbps.
•
Up to 300 Mbps
. Performance mode. This mode allows 802.11n, 802.11g,
and 802.11b devices to join the network and allows 802.11n devices to
function at up to 300
Mbps.
Note:
You can change the wireless mode in the 2.4 GHz band only if the extender
is connected to the WiFi router in the 5 GHz band. If the extender is connected to
the WiFi router in the 2.4 GHz band, the extender adopts the wireless mode that
the WiFi router functions in and the
Wireless mode
menu is disabled.
Note:
WPA-PSK [TKIP] security supports speeds of up to 54 Mbps. Even if your
devices are capable of a higher speed, WPA-PSK [TKIP] security limits their speed
to 54 Mbps.
Note:
To enable the extender to function at full link rate, enable FastLane
Technology or disable 20/40 MHz coexistence. For more information about
FastLane Technology, see
Set the Operating Mode to FastLane Technology
on
page
61. For more information about disabling 20/40 MHz coexistence, see
Manage Advanced WiFi and WPS Settings
on page
53. Disable 20/40 MHz
coexistence only if no other wireless networks are present in your environment.
Security Options (2.4GHz)
Select the type of WiFi security that you want to use for the extender’s 2.4 GHz WiFi network:
•
None
. An open WiFi network that does not provide any security. Any WiFi device can join the network.
•
WEP
. WEP is an older standard, and is less secure than WPA or WPA2. WEP limits the wireless mode
to
Up to 54 Mbps
. WEP uses encryption keys and data encryption for data security. Select 64-bit or
128-bit encryption and enter a key. To join the extender’s WiFi network, a user must enter the key. For
more information, see
Configure WEP
on page
50.
•
WPA-PSK [TKIP]
. WPA is more secure than WEP. Enter a passphrase. For more information, see
Configure WPA, WPA2, or WPA + WPA2
on page
49.
•
WPA2-PSK [AES]
. WPA2 is even more secure than WEP, but some older WiFi devices do not detect
WPA2. Enter a passphrase. To join the extender’s WiFi network, a user must enter the passphrase. For
more information, see
Configure WPA, WPA2, or WPA + WPA2
on page
49.
•
WPA-PSK [TKIP] + WPA2-PASK [AES]
. When your network includes WiFi devices that support either
WPA or WPA2, select WPA-PSK [TKIP] + WPA2-PASK [AES] security. Enter a passphrase. To join the
extender’s WiFi network, a user must enter the passphrase. For more information, see
Configure WPA,
WPA2, or WPA + WPA2
on page
49.
Setting
Description
