NETGEAR RangeMax WPN824EXT, Инструкция по установке

Страница: 40 / 44

RangeMax WiFi Range Extender Setup Manual
36 Default Configuration
v1.0, March 2008
Restoring the Default User Name and Password
You can restore the factory default configuration settings that reset the extender’s user name to
admin, the password to password, and the IP address to 192.168.1.250 . This procedure erases
your current configuration, including your wireless security settings, and restores the factory
defaults. When you log in after resetting, the Smart Wizard configuration assistant prompts you to
configure these settings.
To restore the factory default configuration settings:
1.
Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the extender, for about 20 seconds (see
“Extender Back
Panel” on page 4 ).
2.
Release the restore factory settings button and wait for the extender to reboot.
The factory default settings are restored so that you can access the extender from your web
browser using the factory defaults.