NETGEAR RangeMax WPN824EXT, Инструкция по установке

Страница: 13 / 44

RangeMax WiFi Range Extender Setup Manual
Installing Your WiFi Range Extender Using the Resource CD 9
v1.0, March 2008
You are now connected to the Internet. If you need to configure any settings at a later time,
refer to
“Accessing Your RangeMax WiFi Range Extender after Installation” on page 17 .
Optimizing Performance after Installation
The following procedures will ensure that you get optimum performance from your high-speed
WiFi range extender.
• For your adapter :
– The wireless adapter card for each computer in your network should support the same
settings as your extender (see the online
User Manual for more information).
– To take advantage of the RangeMax™ feature offered by your extender, use a NETGEAR
RangeMax wireless adapter (an adapter that supports up to 108 Mbps).
• Disable your ISP gateway/router’s wireless function . To take advantage of the performance
of your high-speed WiFi range extender, you should disable your ISP gateway/router’s
wireless function. For help, go to
http://kbserver.netgear.com/products/WPN824EXT.asp , and
click the link for your region.
• Set up your network . Set up additional wireless computers in your network to access the
WiFi range extender and connect to the Internet. See “Setting Up Your Wireless Computers”
on page 22 .
• Keep your firmware updated . For information about how to check for new firmware, see
“Updating Your Firmware” on page 20 .