Connecting to the Internet
9
LTE Broadband 11n Wireless Router MBR1515
Power
Solid green
The router is turned on and operating normally.
Solid amber
POST (power-on self-test) in progress.
Off
Power is not supplied to the router.
Internet Port
Solid green
There is an Internet session.
Solid amber
Traffic meter limit has been reached, traffic is blocked.
Blinking green
Data is being transmitted over the Internet connection.
Blinking amber
Traffic meter limit has been reached, but traffic not blocked.
Blinking green and amber Failover from WAN to Mobile Broadband.
Off
No Internet connection detected.
Wi-Fi
Solid blue
The Wi-Fi local port is initialized.
Blinking blue
Data is being transmitted or received over the Wi-Fi link.
Off
The wireless access point is turned off.
LAN Ports
Solid green
The local Ethernet ports have detected wired links with PCs.
Blinking
Data is being transmitted or received.
Off
No link is detected on these ports.
WAN Port
Solid green
The Ethernet WAN port has detected an active link.
Blinking
Data is being transmitted or received.
Off
No link is detected on these ports.
2G/3G
Solid blue
Indicates the router is in 3G+ coverage.
Solid green
Indicates the router is in 2G coverage.
Off
No coverage is detected.
Signal Quality
Solid blue
Excellent coverage detected.
Solid green
Good coverage detected.
Solid amber
Marginal coverage detected.
Off
No coverage detected.
Restore Factory
Settings
Locate the small hole outlined in red on the back of the router. Insert a paperclip into the hole
and push for 6 seconds. Depressing the reset button causes the LED to blink briefly. After the
button is held down for more than 6 seconds, the LED will flash AMBER, and then turn green
as the router resets to the factory defaults. See
Table 1. LED Descriptions
LED
Activity
Description
