Advanced Settings
93
N600 Wireless Dual Band Router JNDR3000
You can usually find the MAC address on the label of the wireless device.
Tip:
You can copy and paste the MAC addresses from the Attached Devices
screen into the MAC Address field of this screen. Use each wireless
computer or device to join the wireless network. Then each is listed in the
Attached Devices screen.
5.
Click the
Add
button.
The screen changes back to the list screen.
6.
Add each computer or device you want to allow to connect wirelessly.
7.
Select the
Turn Access Control On
check box.
8.
Click the
Apply
button.
To edit a wireless device or delete it from the access list:
1.
Select
ADVANCED > Advanced Setup > Wireless Settings
.
The Advanced Wireless Settings screen displays.
2.
In the table, select the radio button next to the wireless device that you want to edit or
delete.
3.
Do one of the following:
•
Click the
Edit
button.
The Edit Wireless Card screen displays.
a.
Edit the address information.
b.
Click the
Accept
button.
•
Click the
Delete
button.
The address is removed from the table.
Wireless Repeating Function
You can set the router up to be used as a wireless access point (AP). This enables the router
to act as a wireless repeater. A wireless repeater connects to another wireless router as a
client where the network to which it connects becomes the ISP service.
