NETGEAR GS108Tv3 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 492

NETGEAR GS108Tv3 Скачать руководство пользователя страница 58

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure System Information

User Manual

58

The IP Configuration page displays.

7.

Select one of the following radio buttons to specify how the network information for the
switch must be configured:

•

Static IP Address

. Specifies that the IP address, subnet mask, and default gateway

must be manually configured. Enter this information in the fields below this radio
button.

•

Dynamic IP Address (BOOTP)

. Specifies that the switch must obtain the IP address

through a BootP server.

•

Dynamic IP Address (DHCP)

. Specifies that the switch must obtain the IP address

through a DHCP server.

8.

If you select the

Static IP Address

radio button, configure the following network information:

•

IP Address

. The IP address of the network interface. The default value is

192.168.0.239. Each part of the IP address must start with a number other than zero.
For example, IP addresses 001.100.192.6 and 192.001.10.3 are not valid.

•

Subnet Mask

. The IP subnet mask for the interface. The default value is

255.255.255.0.

•

Default Gateway

. The default gateway for the IP interface. The default value is

192.168.0.254.

9.

In the

Management VLAN ID

field, leave the default value or specify the VLAN ID for the

management VLAN.

The management VLAN is used to establish an IP connection to the switch from a
computer that is connected to a port in the same VLAN. If not specified, the active
management VLAN ID is 1 (default), which allows an IP connection to be established
through any port.

When you change the management VLAN, an IP connection can be made only through a
port that is part of the management VLAN. Also, the port VLAN ID (PVID) of the port to be
connected in that management VLAN must be the same as the management VLAN ID.

Note:

Make sure that the VLAN that must be the management VLAN exists. Also

make sure that the PVID of at least one port in the VLAN is the same as
the management VLAN ID. For information about creating VLANs and
configuring the PVID for a port, see

Configure VLANs on page

.

The following requirements apply to the management VLAN:

•

Only one management VLAN can be active at a time.

•

When a new management VLAN is configured, connectivity through the existing
management VLAN is lost.

•

The management station must be reconnected to the port in the new management
VLAN.

10.

Click the

Apply

button.

Your settings are saved.

«
...
56
57
58
59
60
...
»

Содержание GS108Tv3













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов