manualshive.com logo in svg

NETGEAR GS108Tv3, Руководство пользователя, Страница: 338 / 492

Поделиться
Скачать
NETGEAR GS108Tv3 Скачать руководство пользователя страница 338

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Manage Device Security 

User Manual

338

•

Quiet Period

. Specify the time in seconds that the port remains in the quiet state 

following a failed authentication exchange. While in the quite state, the port does not 
attempt to acquire a supplicant.

•

Resending EAP

. Specify the EAP retransmit period for the selected port. The 

transmit period is the time in seconds, after which an EAPoL EAP Request/Identify 
frame is resent to the supplicant.

•

MAX EAP Requests

. Specify the maximum number of EAP requests for the selected 

port. The value is the maximum number of times an EAPoL EAP Request/Identity 
message is retransmitted before the supplicant times out.

•

Supplicant Timeout

. Specify the supplicant time-out for the selected port. The 

supplicant time-out is the time in seconds after which the supplicant times out.

•

Server Timeout

. Specify the time that elapses before the switch resends a request to 

the authentication server. 

10. 

Click the 

Apply

 button. 

Your settings are saved.

The following table describes the port authentication status information available on the 
page. 

Table 64.  Port authentication status information

 

Field

Description

Control Direction

The control direction for the specified port, which is always Both. The control 
direction dictates the degree to which protocol exchanges take place between 
supplicant and authenticator.The unauthorized controlled port exerts control over 
communication in both directions (disabling both incoming and outgoing frames).

Protocol Version

The protocol version associated with the selected port. The only possible value 
is 1, corresponding to the first version of the 802.1X specification.

PAE Capabilities

The port access entity (PAE) functionality of the selected port. The option is 

Authenticator or Supplicant.

Authenticator PAE State

The current state of the authenticator PAE state machine. The options are as 
follows:

• 

Initialize

• 

Disconnected

• 

Connecting

• 

Authenticating

• 

Authenticated

• 

Aborting

• 

Held

• 

ForceAuthorized

• 

ForceUnauthorized

Содержание GS108Tv3













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов