manualshive.com logo in svg

NETGEAR GS108Tv3, Руководство пользователя, Страница: 417 / 492

Поделиться
Скачать
NETGEAR GS108Tv3 Скачать руководство пользователя страница 417

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) 

Cloud

 Management 

Monitor the Switch and the Traffic 

User Manual

417

Packets RX and TX 256-511 
Octets

The total number of packets (including bad packets) received or transmitted that 
were between 256 and 511 octets in length inclusive (excluding framing bits but 
including FCS octets).

Packets RX and TX 512-1023 
Octets

The total number of packets (including bad packets) received or transmitted that 
were between 512 and 1023 octets in length inclusive (excluding framing bits 
but including FCS octets).

Packets RX and TX 
1024-1518 Octets

The total number of packets (including bad packets) received or transmitted that 
were between 1024 and 1518 octets in length inclusive (excluding framing bits 
but including FCS octets).

Octets Received

The total number of octets of data (including those in bad packets) received on 
the network (excluding framing bits but including FCS octets). This object can be 
used as a reasonable estimate of Ethernet utilization. If you need greater 
precision, the etherStatsPkts and etherStatsOctets objects must be sampled 
before and after a common interval.

Packets Received 64 Octets

The total number of packets (including bad packets) received that were 64 
octets in length (excluding framing bits but including FCS octets).

Packets Received 65-127 
Octets

The total number of packets (including bad packets) received that were between 
65 and 127 octets in length inclusive (excluding framing bits but including FCS 
octets).

Packets Received 128-255 
Octets

The total number of packets (including bad packets) received that were between 
128 and 255 octets in length inclusive (excluding framing bits but including FCS 
octets).

Packets Received 256-511 
Octets

The total number of packets (including bad packets) received that were between 
256 and 511 octets in length inclusive (excluding framing bits but including FCS 
octets).

Packets Received 512-1023 
Octets

The total number of packets (including bad packets) received that were between 
512 and 1023 octets in length inclusive (excluding framing bits but including 
FCS octets).

Packets Received 1024-1518 
Octets

The total number of packets (including bad packets) received that were between 
1024 and 1518 octets in length inclusive (excluding framing bits but including 
FCS octets).

Packets Received > 1518 
Octets

The total number of packets received that were longer than 1518 octets 
(excluding framing bits, but including FCS octets) and were otherwise well 
formed.

Total Packets Received 
Without Errors

The total number of packets received that were without errors.

Unicast Packets Received

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

Multicast Packets Received

The total number of good packets received that were directed to a multicast 
address. This number does not include packets directed to the broadcast 
address.

Table 76.  Detailed port statistics (continued)

Field

Description

Содержание GS108Tv3













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов