8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Manage Device Security
User Manual
302
For information about the credentials, see
Credentials for the local browser interface on
5.
Click the
Login
button.
The System Information page displays.
6.
Select
Security > Management Security > RADIUS > Server Configuration
.
7.
In the
Server Address
field, specify the IP address of the RADIUS server.
8.
In the
Authentication Port
field, specify the UDP port number that the server uses to verify
the RADIUS server authentication.
The range is from 1 to 65535. The default value is 1812.
9.
From the
Secret Configured
menu, select
Yes
.
You must select
Yes
before you can configure the RADIUS secret. After you add the
RADIUS server, this field indicates whether the shared secret for this server was
configured.
10.
In the
Secret
field, type the shared secret text string used for authenticating and encrypting
all RADIUS communications between the switch and the RADIUS server.
This secret must match the RADIUS encryption.
11.
From the
Active
menu, select
Primary
.
12.
From the
Message Authenticator
menu, select
Enable
or
Disable
to specify whether the
message authenticator attribute for the selected server is enabled.
The message authenticator adds protection to RADIUS messages by using an MD5 hash
to encrypt each message. The shared secret is used as the key, and if the message fails
to be verified by the RADIUS server, it is discarded.
13.
Click the
Add
button.
The server is added to the switch.
14.
To reset the authentication server and RADIUS statistics to their default values, click the
Clear Counters
button.