8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud
Management
Monitor the Switch and the Traffic
User Manual
435
10.
Select whether to display physical interfaces, LAGs, the CPU, or al by clicking one of the
following links above the table heading:
•
1
(the unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
•
LAG
. Only LAGs are displayed.
•
CPU
. Only the CPU is displayed.
•
All
. The physical interfaces, LAGs, and CPU are displayed.
11.
Select one or more interfaces by taking one of the following actions:
•
To select a single interface, select the check box associated with the port, or type the
port number in the
Go To Interface
field and click the
Go
button.
•
To select multiple interfaces, select the check box associated with each interface.
Traffic from the selected ports will be sent to the destination port.
12.
From the
Direction
menu, specify the direction of the traffic that must be mirrored from the
selected source ports:
•
None
. No traffic direction is selected. This is the default setting.
•
Tx and Rx
. Monitors both transmitted and received packets.
•
Rx
. Monitors received (ingress) packets only.
•
Tx
. Monitors transmitted (egress) packets only.
13.
Click the
Apply
button.
Your settings are saved.
The Status field indicates the interface status. The destination port is listed as Probe. The
source ports are listed as Mirrored.