NETEX NESiGate-CO, Справочное руководство

Страница: 28 / 49

Appendix B: NetEx Default Parameters
This section contains a description of the default parameters used by NetEx. Only a few of these can be
changed via the user interfaces. Refer to the web pages to see which parameters can be altered. All oth-
ers will require direction from NESi Support personnel.
Note: “local” and “device1” must be correct or Netex will not initialize.
NetEx/IP Parameter Default Description
local LOCAL Local host name. This is the same name that
is defined in the HOST statement in the NCT
and during the MAKEPAM phase of building
the PAM file.
logerrors default The two allowed values are –
DEFAULT – this value logs adapter and
communications errors that are uncommon.
Some of these errors are normal but normally
occur only once every few hours.
ALL – this value logs all adapter and com-
munication errors.
mbxname *not changable This is the name of the pipe used to move
NRB and DATA requests from user space
into NetEx/IP space.
pamfile *not changable This is the name of the PAM file NetEx/IP
uses to load the initial NCT. This name
should match the name specified in the Con-
figuration Manager MAKEPAM command.
ntxlogname
*not changable This is the name of the NetEx/IP log file.
Messages associated with the operation of
NESiGate NetEx/IP are logged in this file.
msgsyslog
3 This parameter indicates where Netex mes-
sages are recorded.
0: record messages in both ntxlog AND mes-
sages.log (same as 3)
1: record messages in ntxlog ONLY
2: record messages in messages.log ONLY
3: record messages in both ntxlog AND mes-
sages.log (same as 0)
MAN-REF-COSW 2.10-19 Appendix B Page
21