NETEX NESiGate-CO, Справочное руководство

Страница: 40 / 49

NETEX: network protocol error n
Description: A netex network protocol error has been detected. The specific error is identified by “n”
1 Attempt to reroute non-offering side
2 Attempt to confirm to offerer
3 Actual data shorter than specified in protocol
4 D-read failed
5 Not a NETEX message
6 Checksum error
9 Awaiting the second part of a two-part message after the first part was already received.
We received a new one-part message instead.
10 Received the second part of a two-part message prior to receiving the first part.
11 Awaiting the second part of a two-part message after the first part was already received.
We received the first part of a different two-part message instead.
12 Two-part message error—no P-data or O-data
13 Invalid network unique id
14 Bad status creating TUB NDB
User Response:
None. Netex reports the invalid message and continues. This situation can sometimes occur when
messages are dropped on busy networks.
MAN-REF-COSW 2.10-19 Appendix C Page
33