NETEX NESiGate-CO, Справочное руководство

Страница: 31 / 49

NetEx/IP Parameter Default Description
mbufin 5 This is the number of input blocks that Ne-
tEx/IP will allow to be outstanding for each
user. This may have to be increased for long
telecommunications delays.
mbufout 5 This is the number of output blocks that Ne-
tEx/IP will allow to be outstanding for each
user. This may have to be increased for long
telecommunications delays.
msglvl 6 This is the value that controls the verbosity of
the message displays. A value must be speci-
fied as one of the following:
immediate
important
interesting
moderate
monitor
debug
blither
A value of ‘important’ (or less) must be speci-
fied to enable NetEx/IP session establishment
messages to be recorded in the ‘ntxlog’ file.
multihost ON When set ON, allows Netex to distinguish
between SOFFERs of the same application
name from multiple locally attached hosts
(LAN or channel). Set to OFF if there is only
one attached host or if all SOFFERs will have
unique names.
numlogs 5 This value defines the maximum number of
‘ntxlog’ files that are saved by the ‘swlog’
command.
prefprot 2 Defines the default preferred protocol type to
use when connecting to hosts that support
multiple NetEx/IP protocol types.
rcvratesecs 6 This is the time interval (in seconds) after
which the receive rate for a network connec-
tion is recalculated. The receive rate refers to
the rate at which the application is receiving
data from NetEx.
sndratesecs 3 actual send rate calculation interval
smqmax 25 max number of waiting incoming connects for
session manager
Page 24 Appendix B MAN-REF-COSW 2.10-19