22
NetComm Wireless Light Industrial M2M Router Plus
www.netcommwireless.com
ITEM
DEFINITION
System information
System up time
The current uptime of the router.
Board version
The hardware version of the router.
Router Serial Number
The serial number of the router.
Software
The software version number running on the router.
Model
The type of phone module and the firmware version of the module.
Firmware
The firmware revision of the phone module.
MDN
The Mobile Directory Number of the router on the network.
LAN
IP
The IP address and subnet mask of the router.
MAC Address
The MAC address of the router.
Ethernet Port Status
Displays the current status of the Ethernet port and its operating speed.
Cellular connection status
Activation Status
Displays the activation status of the router on the carrier network.
Coverage
Indicates the type of coverage being received by the router’s antennas.
Signal strength (dBm)
The current signal strength measured in dBm
Roaming status
The roaming status of the router.
SID / NID
The System ID and Network ID of the router.
MIP IP Address
The Mobile IP Address.
MEID
The mobile equipment identifier (MEID) of the router, a unique code for identifying devices on a CDMA network.
Frequency
The channel that the router is using on the mobile network.
Network Registration Status
The status of the router’s registration for the current network.
WWAN Connection Status
Status
The connection status of the active profile.
IP Type
The type of IP in use. SIP is a Simple IP connection and when moving between cell sectors, the PPP session is torn
down. MIP is a Mobile IP connection which creates an address which is persistent between across cell sectors
allowing the mobile connection to remain connected even when moving between cell sectors.
WWAN IP
The IP address assigned by the mobile broadband carrier network.
DNS server
The primary and secondary DNS servers for the WWAN connection.
Connection uptime
The length of time of the current mobile connection session.
Advanced status
Mobile Country Code
The Mobile Country Code (MCC) of the router.
Mobile Network Code
The Mobile Network Code (MNC) of the router.
Power Input Mode
Displays the router’s power source.
DC Input Voltage
Displays the current voltage of the power input source provided via the DC Input jack
Cell ID
A unique code that identifies the base station from within the location area of the current mobile network signal.
PN (1x) Index
The pseudo-random number index used in encrypting the mobile connection for RTT connections.
PN (1x EVDO) Index
The pseudo-random number index used in encrypting the mobile connection for EVDO connections.
Channel (1x)
The 1x (RTT) channel number in use.
Channel (1x EVDO)
The 1x (EVDO) channel number in use.
Signal quality (Ec/Io)
A measurement of the portion of the received signal that is usable. This is the signal strength minus the signal noise
level.
MIP Profile Information
Displays various details about the profile used to connect to the broadband network.
Table 10 - Status page item details
