NetComm Wireless NTC-40WV Industrial Indoor 3G Router with Voice
/
69
Allows you to specify an executable and parameters to be used as an endpoint. For example, the following executable reads the
phone module temperature every second.
while true; do wwan.0.radio.temperature; sleep 1; done
The temperature can then be sent to another endpoint.
Figure 74 – User defined executable endpoint configuration
To create an endpoint:
1.
Click the +Add button on the right side of the page. A pop-up window appears.
Figure 75 - Creating an endpoint
2.
In the Endpoint name field, type a name for this endpoint. The name can contain alphanumeric characters only i.e. A-Z, a-
z, 0-9.
3.
Use the Endpoint types drop down list to select the type of endpoint to configure.
4.
Click the OK button. The router displays a screen with configuration options for your chosen endpoint type. Enter the
options for your endpoint as required.
5.
Click the Save button. The Endpoints list is displayed with the newly created endpoint listed and a summary of the settings
your configured.
Figure 76 - Endpoints list
