NetComm Wireless NTC-40WV Industrial Indoor 3G Router with Voice
/
129
Additional Product Information
Using the NTC-40WV to make and receive telephone calls
The NTC-40WV provides circuit switched voice services via a telephony line interface offering the ability to make and receive
telephone calls via a regular analogue telephone using the 3G mobile network.
Note: Please refer to your mobile service provider for activation of your voice service and information about the call charges
that apply.
Handset requirements
The NTC-40WV allows you to make telephone calls over the 3G network using a standard analogue telephone via the built in RJ-11
Phone port. Please refer to the documentation provided by the manufacturer of your analogue telephone for assistance with the
operation of your telephone handset.
Maximum REN Loading
Please note that each of the line interfaces on the NTC-40WV is capable of supporting multiple analogue telephones connected via
splitters. The ringer equivalence number (REN) for each line is 5. Therefore, a maximum of 5 handsets each with a REN number of 1
can be connected to each line port.
Before you start making any phone calls, make sure you have checked the following:
You have an activated 3G SIM card inserted prior to powering on the NTC-40WV.
1.
Your NTC-40WV is powered on and in running condition.
2.
A working analogue telephone connected into the Line port.
3.
You hear the dial tone after lifting the handset.
How to place a call
To make a call, simply lift the handset and dial the number following the instructions provided by your telephone handset
manufacturer.
How to receive a call
When an incoming call is received, the phone connected to the NTC-40WV will ring. Answer the telephone following the instructions
provided by your telephone handset manufacturer to conduct the call.
If there is no phone connected to the NTC-40WV, all incoming calls will be transferred to Voicemail (if enabled on the device).
Answering an incoming call when on a call
Call waiting enables a 2nd incoming call to be received while you are on a call. To answer a call waiting call, perform a hook-flash
(clicking “flash” button, or briefly depressing the hook button) and then click button 2. The incoming call should then be answered.
Upon performing another hook-flash, waiting for 2 seconds and then clicking button 2, you will be returned to the original telephone
call.
Accessing voicemail
To access your voicemail, please dial *98 and follow the voice prompts.
