NetComm InModem 56, Руководство пользователя

Страница: 20 / 28

19
YML545
\Rn Ring indicator signal off after the telephone call is answered
(Compatibility command)
\R0
: ring indicator signal is off after the telephone call is answered
Result Codes
:
OK n = 0
ERROR Otherwise
\Tn Inactivity Timer
This command specifies the length of time (in minutes) that the modem will wait before
disconnecting when no data is sent or received. A setting of zero disables the timer.
Alternatively, this timer may be specified in register S30. This function is only applicable to
buffer mode.
\T0 : Inactivity timer disabled (default).
Result Codes
:
OK n = 0 – 255
ERROR Otherwise
\Vn Protocol Result Code
\V0
: Disable protocol result code appended to DCE speed.
\V1 : Enable protocol result code appended to DCE speed (default).
\V2
: Same as \V1.
Result Codes :
OK n = 0, 1
ERROR Otherwise
\Xn XON/XOFF Pass Through
\X0
: Modem process XON/XOFF flow control characters locally (default).
\X1 Modem passes XON/XOFF flow control characters.
Result Codes
:
OK n = 0, 1
ERROR Otherwise
-Cn Data Calling Tone
Data Calling Tone is a tone of certain frequency and cadence as specified in V.25 which
allows remote Data/FAX/Voice discrimination. The frequency is 1300 Hz with a cadence of .5
s on and 2 s off.
-C0
: Disabled (default).
-C1 : Enabled.
Result Codes:
OK n = 0, 1
ERROR Otherwise
-V90 = <n>
Command to enable/disable V.90 and change downstream rate
-V90=0 will disable V.90
-V90=1
will enable V.90 Auto Rate (default value)