NetComm InModem 56, Руководство пользователя

Страница: 16 / 28

15
YML545
&Sn Data Set Ready (DSR) Option
This command selects DSR action.
&S0 : DSR always ON (default).
&S1
: DSR comes on when establishing a connection and goes off when the
connection ends.
Result Codes :
OK n = 0, 1
ERROR Otherwise
&Tn Self-Test Commands
This command allows the user to perform diagnostic tests on the modem. These tests can
help to isolate problems when experiencing periodic data loss or random errors.
&T0 Abort. Stops any test in progress.
&T1
Local analog loop. This test verifies modem operation, as well as the connection
between the modem and computer. Any data entered at the local DTE is modulated,
then demodulated, and returned to the local DTE. To work properly, the modem must
be off-line.
&T3
Local digital loopback test.
&T6
Remote digital loopback test. This test can verify the integrity of the local
modem, the communications link, and the remote modem. Any data entered at the
local DTE is sent to, and returned from, the remote modem. To work properly, the
modems must be on-line with
error control disabled .
Result Codes:
OK n = 0
CONNECT n = 1, 3, 6
ERROR Otherwise
&V View Active Configuration and Stored Profile
This command is used to display the active profiles.
For example:
Option Selection AT Cmd
Comm Standard Bell B
CommandCharEcho Enabled E
Speaker Volume Medium L
Speaker Control OnUntilCarrier M
Result Codes Enabled Q
Dialer Type Tone T/P
ResultCode Form Text V
ExtendResultCode Enabled X
Dial Tone Detect Enabled X
Busy Tone Detect Enabled X
LSD Action Standard RS232 &C
DTR Action Standard RS232 &D
Press any key to continue; ESC to quit.
Option Selection AT Cmd
V22b Guard Tone Disabled &G
Flow Control Hardware &K
Error Control Mode V42, MNP, Buffer \N
Data Compression Enabled %C
AutoAnswerRing# 0 S0
AT Escape Char 43 S2
CarriageReturnChar 13 S3
Linefeed Char 10 S4