NetComm InModem 56, Руководство пользователя

Страница: 12 / 28

11
YML545
Q0
: Enables modem to send result codes to the computer (default).
Q1 : Disables modem from sending result codes to the computer.
Result Codes
:
OK n = 0, 1
ERROR Otherwise
T Select Tone Dialing
This command instructs the modem to send DTMF tones while dialing. Dialed digits are tone
dialed until a P command or dial modifier is received. This is the default setting.
Vn DCE Response Format
This command controls whether result codes (including call progress and negotiation
progress messages) are displayed as words or their numeric equivalents. For the result code,
see table 4.
V0 : Displays result codes as digits.
V1
: Displays result codes as text (default).
Result Codes :
OK n = 0, 1
ERROR Otherwise
Wn Result Code Option
W0 : CONNECT result code reports DTE receive speed. Disable protocol result
codes.
W1 : CONNECT result code reports DTE receive speed. Enable protocol result codes.
W2
: CONNECT result code reports DCE receive speed. Enable protocol result codes
(default).
Result Codes :
OK n = 0, 1, 2
ERROR Otherwise
Xn Result Code Selection and Call Progress Monitoring
This command enables tone detection options used in the dialing process. As these functions
are chosen, the modem chip set’s result codes are also affected. Therefore, this command is
frequently used to control the modem chip set’s responses. The primary function of this
control is to control the modem chip set’s call response capabilities.
X0
Ext. Result Code Dial Tone Detect Busy Tone Detect
X1 Disable Disable Disable
X2 Enable Disable Disable
X3 Enable Enable Disable
X4 Enable Disable Enable (default)
X5 Enable Enable Enable
X6 Enable Enable Enable
X7 Enable Enable Enable
X8 Disable Enable Enable
Extended Result Codes
Disabled : Displays only the basic result codes OK, CONNECT, RING, NO
CARRIER, and ERROR.