NetComm InModem 56, Руководство пользователя

Страница: 15 / 28

14
YML545
&Kn Local Flow Control Selection
&K0
: Disable flow control
&K1 : Reserved
&K2
: Reserved
&K3 : Enable RTS/CTS (hardware) flow control (default)
&K4
: Enable XON/XOFF flow control
Result Codes :
OK n = 0, 3, 4
ERROR Otherwise
&Mn Asynchronous Communications Mode
&M0 : Asynchronous mode (default).
&M1
: Reserved
&M2 : Reserved
&M3
: Reserved
&M4 : Reserved
Result Codes
:
OK n = 0
ERROR Otherwise
&Pn Pulse Dial Make-to-Break Ratio Selection
This Command is effective only for Japan.
&P0 39/61 make/break ratio, 10PPS
&P1
33/67 make/break ratio, 10PPS (default)
&P2 33/67 make/break ratio, 20PPS
Result Codes
:
OK n = 0, 1, 2
ERROR Otherwise
&Qn Asynchronous Communications Mode
&Q0
: Asynchronous Mode, buffered. Same as \N0.
&Q5 : Error Control Mode, buffered (default). Same as \N3.
&Q6
: Asynchronous Mode, buffered. Same as \N0.
&Q8 : MNP error control mode. If an MNP error control protocol is not established, the
modem will fallback according to the current user setting in S36.
&Q9
: V.42 or MNP error control mode. If neither error control protocol is established,
the modem will fallback according to the current user setting in S36.
Result Codes
:
OK n = 0, 5, 6, 8, 9
ERROR Otherwise