Feature
Description
Blanking panels
The number and size of blanking panels you
receive depends on your configuration. The
empty system cabinet is shipped with no
blanking panels installed.
Bolt-down kit
This optional kit enables you to secure the
system cabinet to the data center floor. The kit it
is not intended for seismic stability.
•
Four bolt-down brackets
•
Four spacer brackets
•
Six M8x20 mm hex head bolts and washers
Interconnect kit
This optional kit enables you to connect
multiple system cabinets to each other.
•
Interconnect brackets
◦
One set of four interconnect brackets for
connecting the system cabinets with side
panels on
◦
One set of four interconnect brackets for
connecting the system cabinets with the
side panels off
•
Four M12x20 Torx-30 screws used in
system cabinet with side panels on.
•
Eight M6x10 countersunk Torx-30 screws
used in system cabinet with side panels off.
Support rail kit
If you ordered additional support rails with your
system cabinet, each kit contains one left and
one right support rail.
Attention:
The support rails and kit are
designed to fit only the NetApp 42U 1280
mm system cabinet. Do not use the rails or a
rail kit from other system cabinets because
they are not designed for use in the 42U 1280
mm system cabinet.
•
A left and right support rail
•
Two screws per rail for securing the rail to
the system cabinet frame
Crescent wrench
The crescent wrench is used to remove the hold-
down brackets on the packing pallet, adjust the
system cabinet leveling feet, and install the bolt-
down kit brackets, if ordered.
Preparing to install the system cabinet | 5
