Max 8 and 8 Plus User’s Guide – Chapter 4
51
Password Request Only
– This option
prevents unauthorized access to the FXO
port on which it is set. Callers are asked to
enter a password through the telephone
keypad before access to the PBX is
permitted.
To configure this option, you must create a
password in the Password column. The
password may consist of no more than 5
numeric characters.
Welcome and Password
– This
option combines the two functions
described above.
IMPORTANT: If a Net2Phone account
number is entered for an FXO port in the
Account Configuration Table (see the
Account Configuration section on page 37
in this Guide) the account entered acts as
a “default” account for the port. Charges
incurred by callers through that port
automatically accrue to this account.
Use Forwarding Number
– Select this IVR
option for a port if you wish to have incoming
calls to that port forwarded to a specified
number automatically, without notice to the
caller. Any PSTN telephone number, or a
net2phone virtual number (*72 plus the first
ten digits of a net2phone account number),
may be entered in the
Forwarding Number
column. If a PSTN number is entered, it must
be entered using the PBX’s dialing plan. For
example, if PBX users dial
9
for an outside
line, the PSTN telephone number must be
preceded by a
9
.
Receiving Max-to-Max Calls
For the Max 8 or Max 8 Plus to be able to receive Max-to-
Max calls, the Account Configuration Page (see
Figure 14
Содержание 8 Plus
