Net2Phone 8 Plus, Руководство пользователя

Страница: 28 / 113

Max 8 and 8 Plus User’s Guide – Chapter 2
20
The voice prompt announces, “DHCP is disabled
now. Please press pound”.
3. Press the pound key (
#
) (Important!) .
4. Hang up the telephone.
DHCP is now disabled.
E
NTERING AN
IP
ADDRESS FROM A
T
ELEPHONE
K
EYPAD
Ask your LAN administrator for the IP address that will be
assigned, the LAN’s net mask address, domain name, and
any other IP parameters that can be provided.
To enter the IP address:
1. Lift the telephone handset and dial
***
2 (the IP
address parameter code).
The voice prompt responds, “Please enter your
IP address.”
2. Dial the numbers for the IP address you wish to
enter on the telephone keypad. Use the star key
(
*
) to replace the periods in the address and end
with the pound key (
#
).
3. For example, if you want to enter the IP address
“192.168.172.19”, you would enter
192*168*172*19#
from your telephone keypad.
4. The voice prompt responds, “Your address is…”
and repeats the address you entered.
5. If the new address is correct, simply hang up the
telephone. If the new address is incorrect, hang
up the telephone and repeat from step 1, above.
6. Reset the Max 8 or Max 8 Plus to activate the
changes. To do this, power-off the unit, wait 10
seconds, and turn it on again.
DHCP is now disabled.
You are now ready to finish setting up the Max 8 using the
Max Web Manager. Proceed to Chapter 3,
Logging In to
the Max Web Manager .