Net2Phone 8 Plus, Руководство пользователя

Страница: 23 / 113

Max 8 and 8 Plus User’s Guide – Chapter 2
15
LAN before you can browse the Max Web Manager , Max’s
Web-based configuration system. If your LAN uses DHCP,
configuring the Max 8 or 8 Plus will entail the following
steps:
1. Obtain the Max 8 or 8 Plus current IP address.
2. Log in to the Max Web Manager.
3. Set the required configuration parameters in the
Max Web Manager.
Obtaining the Max DHCP IP Address via
Telephone Keypad
For many users, the handiest way to query the Max 8’s or
Max 8 Plus’s current IP address is usually from a
telephone keypad. To use this procedure, you will need a
standard analog corded or cordless touch-tone telephone.
Get a pencil and paper to write down the IP address.
NOTE: To use this method for the Max 8
Plus, there must be an FXS card installed.
1. Connect your telephone to any FXS (RJ-11) port
on the Max 8.
2. Pick up the telephone handset and dial ***1 (***1
on the keypad).
The voice prompt responds, “Your IP address
is…” and the IP address is announced.
3. Write down the address and hang up the
telephone. If you need to hear the address again,
hang up the telephone, then repeat step 2.
4. You are now ready to finish setting up the Max 8
using the Max Web Manager.
5. Proceed to Chapter 3, Logging in to the Max
Web Manager .