Door Assembly
200mmConstruct the doors on a hard flat
surface. Take a vertical door tube (without latch)
and slide on two door hinges roughly 200mm
from the tube ends. Bolt the hinges to secure
them into place. Then assemble the rest of the
door frame parts
(SEE FIG8)
.
The door frame parts will simply slot and lock
into place. Make sure the push buttons on the
top & bottom frame locks into the tube holes.
Door Installation
The door kit includes 2 qty x door upright tubes
with fittings. This allows you to position the door
in any location around the fruit cage.
Door Upright Position
Choose a position on the cage where you would
like the door to be installed. The ground spikes
for the 2 qty x door uprights tubes need to be set
at 1065mm centres into the ground soil. Once set
in the ground, slot both door upright tubes into
the ground spikes. Make sure the push buttons
lock into tube holes
(SEE FIG9).
1065mm
200mm
Latch
FIG8
FIG9
Installation
Guide
