Net Optics IBP-HBCU3 Скачать руководство пользователя страница 7

Страница: 7 / 56

iBypass Switches with Heartbeat

Passive, Secure Technology

• Fail-open monitoring with any 10 GigaBit appliance at speeds of 10 Gbps

• Protection against power, link, and application failure

• Link Fault Detect prevents undetected link failures

• XFP (10 Gigabit) and SFP (Gigabit) pluggable transceivers

• Increased reliability on critical network links

• High-speed switching with minimal insertion loss

• Custom Heartbeat packet option with configurable timeout (Heartbeat) and retries

• Tap mode during Bypass

• Fully RoHS Compliant

Ease of Use

• LED indicators show power, link, bypass and activity status

• Front-mounted connectors support easy installation and operation

• Optional 19-inch rack frame holds two iBypass Switches

• Compatible with all major manufacturers’ monitoring devices, including protocol

analyzers, probes, and intrusion detection/prevention systems

Support

In the event that you require our assistance, our world-class technical support is

available to help you.

Support is available 24x7 for customers with a Premium Service Plan, and from 7:00

a.m. to 5:30 p.m. PST, Monday through Friday, for all other customers.

If, at any time, you have questions, please feel free to contact us by using one of the

following methods:
• Phone: (408) 737-7777

• Email: [email protected]

• Customer Portal: http://customer.netoptics.com/portal

Bypass Modes

The iBypass Switch with Heartbeat bypasses attached in-line device and sends

traffic straight through the network link when one of three events occurs:
• Power loss to the switch

• Link failure

• Application failure

Содержание IBP-HBCU3
























































Результаты поиска

Содержание IBP-HBCU3

Отзывы:

Похожие инструкции для IBP-HBCU3

Бренды по названию

Популярные бренды

Net Optics IBP-HBCU3, Руководство пользователя

Результаты поиска

Содержание IBP-HBCU3

Отзывы:

Похожие инструкции для IBP-HBCU3

Бренды по названию

Популярные бренды