iBypass Switches with Heartbeat
35
6. Check your settings and click Create. The iBypass Switch appears in the
system frame.
The indicator to the right of the iBypass Switch picture blinks green when the
iBypass Switch is functioning normally. If there is an alarm condition on the iBypass
Switch, the indicator blinks red. If System Manager cannot communicate with the
iBypass Switch, the switch graphic is grayed. Check that the iBypass Switch is con-
nected to the network and verify the configuration information.
Repeat Steps 1-6 for each iBypass Switch you are adding to System Manager.
Tip! _____________________________________________________________________
To change the display order of iBypass Switches, click and drag them into the
desired order.
__________________________________________________________________________
Delete an iBypass Switch from System Manager
You can delete an iBypass Switch from System Manager when you remove an iBy-
pass Switch from your network. If you have removed an iBypass Switch from the
network, System Manager continues to poll the iBypass Switch IP address for data
until you delete the iBypass Switch from System Manager.
To delete an iBypass Switch from System Manager:
1. Select the device you want to delete by clicking its icon.
