manualshive.com logo in svg

Ness R8, Руководство по установке

Поделиться
Скачать
Ness R8 Скачать руководство пользователя страница 43

Ness R8

 - Installation and Programming Manual

43

PROGRAMMING

When enabled the panel will test the telephone line every 20
seconds. If the telephone line is not found, the keypad LINE  icon
will commence flashing. If the line fault continues for 2 minutes
then the keypad beeps a warning.

OFF = Telephone Line Monitor disabled.
ON = Telephone Line Monitor enabled.

PROGRAMMING SEQUENCE

1. Press: 

P89E

2. Press: 

5E

 to turn the option on or off.

Zone light/s on indicates the option is enabled.

PROGRAM MODE LEVEL:

Installer, Remote by PC.

FACTORY DEFAULT:

OFF, Telephone Line Monitor
disabled.

NOTES:

P89E, 5E

TELEPHONE LINE MONITOR

These options enable remote upload/download features.

P90E, 1E, REMOTE ACCESS

When selected on, this option allows the panel to be remotely
upload/downloaded by a remote computer.
OFF = Remote Access is disabled.
ON = Remote Access is enabled.
(Default = OFF).

P90E, 2E, 

Not used.

P90E, 3E, REMOTE ARMING

Allows the remote Arming of the control panel using a standard
DTMF telephone or mobile phone.
OFF = Remote Arming is disabled.
ON = Remote Arming is enabled.
(Default = OFF).

P90E, 4E, REMOTE DISARMING

Allows the remote Disarming of the control panel using a standard
DTMF telephone or mobile phone.
OFF = Remote Disarming is disabled.
ON = Remote Disarming is enabled.
(Default = OFF).

PROGRAMMING SEQUENCE

1. Press: 

P90E

2. Press: 

[1-4] E

 to toggle each zone on or off.

Zone light/s on indicates which option/s are enabled.

PROGRAM MODE LEVEL:

Installer, Remote by PC.

FACTORY DEFAULT:

1E = OFF
2E = not used
3E = OFF
4E = OFF

NOTES:

Option P90E 1E, Remote
Access applies only to
upload/download by computer
and modem.

If P90E 1E is disabled, remote
Arm/Disarm is still available if
options P90E 3E and/or 4E
are on and P91E is not zero.

P90E

UP/DOWNLOAD OPTIONS

Содержание R8

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды