Ness R8
- Installation and Programming Manual
12
KEYPAD DISPLAY IN MEMORY REVIEW MODE
EVENT
DISPLAY ICONS
Arm
ARMED
Disarm
blank
Auto Exclude Zone
E 1..8
Mains Fail
MAINS
Panel Panic/Medical/Fire
EXCLUDE
Battery Fail
BATTERY
Line Fault
LINE
Dialler Call Fail
LINE
Zone Alarm
1..8
Tamper Panel/Siren
TAMPER
Tamper(4
th
failed attempts)
PROGRAM
Radio Jamming
RADIO
Radio Substitution
RADIO
Pendant Low Battery
RADIO + B 2..15
Pendant Panic/Medical
RADIO + EXCLUDE
Detector Tamper
RADIO + 1..8
Detector Low Battery
RADIO + B 1..8
Detector Supervision Fail
RADIO + 1..N
Pendant Supervision Fail
RADIO + M 1..8
OPERATION
OPERATING MODES
The Ness R8 will operate in one of the following modes:
ARMED.
The system is “On” and ready to detect intrusion.
DISARMED.
The system is “Off”. This is the normal mode when the premises are occupied. Day
Zones and 24 Hour Zones (if configured) are active.
DAY MODE.
The system is Disarmed and a zone or zones have been setup to create an alarm
when activated. Often used as a doorway alert in a shop. (See P53E Day Zones).
MONITOR MODE.
Allows the system to be “partially” Armed. For example, in a house, to allow all
perimeter zones, doors and windows, to be Monitored (armed) at night. (See P51E Monitor
Zones).
24HR ZONES.
Zones that have been setup to be active in any mode. Usually used for Tamper
switches and Panic buttons. (See P52E 24hr Zones).
DOORBELL.
The radio Doorbell operates in any panel mode. The doorbell can be triggered using
the 100-056 Doorbell transmitter. (Most Ness transmitters can be programmed to operate the
Doorbell function, see page 25, Extra Option for Radio Keys).
See page 21 for doorbell volume and selectable chimes settings.
