2
CopyrIGhT NoTICE
all rights reserved. No part of this publication may be reproduced, transmitted or stored in a retrieval system in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Ness.
Ness reserves the right to make changes to features and specifications at any time without prior notification in the interest of
ongoing product development and improvement.
© 2022 Ness Corporation pty Ltd aBN 28 069 984 372
D8XCEL, D16XCEL 4G USEr'S MaNUaL for NavIGaTor KEypaDS
Document part No: 890-498
rev 1.12 feb 2022
for use with Ness D8XCEL, D16XCEL control panels with 4G, v11.3 and later.
related manuals:
890-497 D8/D16 XCEL 4G LCD Keypad User Manual
890-490 D8/D16 XCEL 4G Installer’s Manual
Innovative Electronic Solutions
www.ness.com.au
National Customer Service Centre
ph: 1300 551 991
[email protected]
Warnings & notices
Ness Corporation manufacturing processes are accredited to ISo9001 quality standards and all possible care and
diligence has been applied during manufacture to ensure the reliable operation of this product. however there are various
external factors that may impede or restrict the operation of this product in accordance with the product’s specification.
These factors include, but are not limited to:
1. Erratic or reduced radio range (if radio accessories are installed). Ness radio products are sophisticated low power
devices, however the presence of in-band radio signals, high power transmissions or interference caused by electrical
appliances such as Mains Inverters, Wireless routers, Cordless phones, Computers, Tvs and other electronic devices
may reduce radio range performance. While such occurrences are unusual, they are possible. In this case it may be
necessary to either increase the physical separation between the Ness receiver and other devices or if possible change
the radio frequency or channel of the other devices.
2. Unauthorised tampering, physical damage, electrical interruptions such as mains failure, electrical spikes or lightning.
3. Solar power inverters are a known source of electrical interference. please ensure that this product and all associated
cabling is installed at least 3 metres away from a solar power inverter and its cabling.
4. While SMS reporting is a powerful and useful feature it is dependent on the integrity and availability of the cellular
network. as with any SMS message it is possible that SMS monitoring reports may be delayed or fail to be delivered.
Such failures are a function of the cellular network/s and beyond the control of Ness Corporation. Ness recommends
central station monitoring as your primary monitoring path.
5. Ness recommends Ip protocol for most reliable back-to-base reporting. Contact ID (CID) is available as an option and
should only be used if your central station does not offer Ip protocols.
Warning:
Installation and maintenance to be performed only by qualified service personnel.
caUtion:
risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries in accordance with local
regulations.
