42 |
P a g e
Ness IQ-SDI Users Manual
Click (
) each frame on Resolution column to select recording resolution of a corresponding camera. User may select one
of 360x 240(288), 720x240(288), 720x480(576), 1280x720 and 1920x1080
Click (
) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
Ness IQ-SDI Model
360x 240(288)
720x240(288)
720x480(576)
1280 x 720
1920 x 1080
4 Channel DVR
Max. 25 fps per Channel
Max. 25 fps per Channel
Max. 25 fps per Channel
Max. 12 fps per Channel
Max. 7 fps per Channel
8 Channel DVR
Max. 25 fps per Channel
Max. 25 fps per Channel
Max. 25 fps per Channel
Max. 12 fps per Channel
Max. 7 fps per Channel
16 Channel DVR
Max. 12 fps per Channel
Max. 12 fps per Channel
Max. 12 fps per Channel
Max. 7 fps per Channel
Max. 7 fps per Channel
Click (
) each frame on ‘Quality’ column to select recording quality of a corresponding camera. User may select its
recording quality from Super, High and Std.
Click (
) each frame on ‘Duration’ column to select recording duration (i.e., 1 second ~3 hours) of a corresponding camera.
User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
Choose ‘OK’ to confirm the setting.
NOTE
The maximum recording frame is varied from different types of HD-SDI signal which can be input in to a DVR
NOTE
A, B Types of DVR will detect 1080i, 1080p or 720p HD-SDI input signals automatically while it is booting. (Auto Detection).
NOTE
For 1080i signal input, it cannot be used together with 720p and/or 1080p. Also Live zoom function is not supported.
CAUTION
IF USER CONNECTS DIFFERENT TYPES OF HD-SDI SIGNALS WHILE DVR IS OPERATING. IT MAY CAUSE MALFUNCTIONS OF DVR.
4.5.2 Schedule
Please
click (
) RECORD>Schedule
.
Each weekday is composed of 24 ‘Time blocks’. Each block represent 1 hour.
Click (
) Camera
frame to select Camera No. 1.
Please set the recording mode as follows:
①
Mark a check box the desired recording mode in the schedule (i.e., Continuous, Alarm, Motion and PreAlarm)). If user
wants to stop recording, please clear all check boxes.
②
Click block, row, column or all (square box) to register desired recording mode.
-
Click (
) a block and only the block will be registered.
-
Click (
) a row (S~H) and the entire row will be registered.
-
Click (
) a column (00~23) and the entire column will be registered.
-
Click (
) a square box (top-left side between ‘S’ and ‘00’) and all the rows/columns will be registered.
