23 |
P a g e
Ness IQ-SDI Users Manual
④
When all data are deleted, a dialogue box asking “Are you sure to remove log?” will pop up.
⑤
Choose ‘OK’ to delete all the recorded data as well as System Log.
When user finished all the necessary inputs to SYSTEM menu, please
click (
) ‘OK’
on the bottom to go back to SETUP
screen.
NOTE
This might take a while to completely delete all data, and DVR will reboot after the data is cleared.
4.2.2 Admin
Please
click (
) SYSTEM>Admin
and the following screen will appear.
Date
This menu will allow user to adjust the settings.
Please follow the procedure below for time adjustment.
①
Click (
) items (Y, M, D) to change. A designated item will be highlighted in a box (Y: Year, M: Month and D: Date).
②
Adjust the number by clicking (
)
▲
,
▼
buttons on the right-hand side.
③
Repeat the same procedure to change Y, M and D.
Time
This menu will allow user to adjust the current time. The adjustment procedure is same as of Date.
CAUTION
IF ADJUSTED DATE/TIME IS PRIOR TO RECORDED DATA, DATA AFTER NEW DATE/TIME MAY BE ERASED.
CAUTION
ANY CHANGE IN DATE/TIME IS IMMEDIATELY APPLIED ON VIEWING SCREEN (LIVE), BUT THE DATE/TIME WHEN THE RECORDING
WAS DONE IS NOT CHANGED. MAKE SURE TO REBOOT DVR AFTER CHANGING THE DATE/TIME. DO NOT FORGET TO EXECUTE
SHUTDOWN (SYSTEM>Shutdown) BEFORE REBOOT.
Time Zone
Please
click (
) Time Zone
frame to see the list of nations and choose one.
Click (
) a check box next to Use Daylight Saving Time. When user dwells in a region of DST area, please check it (i.e.
).
If DST is observed, please
click (
) Period
and the following screen will appear.
Date / Time