26 |
P a g e
Ness IQ-SDI Users Manual
S.M.A.R.T Setup
Please
click (
) S.M.A.R.T Setup
and the following screen will appear.
Check the square box
next to Use On. Through S.M.A.R.T function, make alarm message, indicating HDD damage, will
show.
Check
Beep; it will give the alarm sound, indicating HDD damage, as the SMART setup.
Check
Blink Message, the alarm message will blink on the OSD, as the SMART setup.
If “Use on” box is unchecked, Beep, Blink Message will be unchecked automatically. Only when “Use on” is checked
, user
can set Beep, Blink Message function.
Click (
) Inspection Time
frame to set inspection time.
Click Check
by frame to select inspection interval.
Last Check Time: show the time of the last inspection.
Check
Alarm out : user can set the alarm out, when S.M.A.R.T function detects Abnormal symptoms from HDD.
Duration of alarm out operating time can adjust on
DEVICES>Alarm Out setup
section (please refer 4.4.5).
Clicking (
)
▲
,
▼
direction buttons on the right-hand of alarm-out frame to select the device for alarm out.
Click (
)
▲
,
▼
direction buttons on the right-hand side of Temperature frame to adjust to maximum temperature for the
HDD used in DVR. In general, it is 55
℃
℃
℃
℃
.
Click (
)
▲
,
▼
direction buttons on the right-hand side of HDD Damage frame to set the permissible level of HDD damage
(%). HDD is a very crucial element for DVR recording, so set the permissible level within 1% to 2% to assure maximum
safety.
-
While pressing (+) or (-) button on the rightmost side of Temperature or HDD Damage item, a target value increases or
decreases by 10 units.
Choose ‘OK’ to confirm the setting.
4.2.3 Account
Please
click (
) SYSTEM>Account
and the following screen will appear.
Please
click (
) New Group
and the following screen will appear.
New Group
