NESS D8X / D16X DELUXE CONTROL PANEL – USER'S MANUAL
22
PROGRAMMING
EXAMPLES
The panel must be in program mode.
MEMORY E
USER CODE PROGRAMMING RULES
including Arming/Disarming, Home Mode, Panic, memory recall and much more.
Codes or Access Cards as required. Ask your installer.
NOTES
1.
User codes must NOT start with zero.
programmed but they will not operate the panel. This is an alternative method for disabling user codes.)
2. All codes must be unique to each other. Codes are rejected if already used. Some codes that are
similar to existing codes may also be rejected.
3. When re-programming a Keypad Code, the old code does not need to be deleted first. The new
code will overwrite the old code.
Programming
USER CODES
STEP KEYSTROKES
DESCRIPTION
COMMENT
1
+
[M
ASTER
C
ODE
]
+
Enters User Program Mode.
The Program light will turn
on.
2
+
[O
PTION
N
O
.]
+
Enter the 3 digit option number
for the user code being pro-
grammed.
The existing user code, if
any, will be displayed by the
keypad one digit at a time.
3
[N
EW
C
ODE
]
+
[N
EW
C
ODE
]
+
Enter the new user code twice
for verification. Keypad codes
can be 3-6 digits long.
The new user code will be
displayed by the keypad
one digit at a time.
4
+
To exit User Program Mode.
The Program light will turn
off.
A keypad code can be deleted by pressing
+
at STEP 3 above.
A keypad code only needs to be deleted if you're not replacing it with a new code.
User codes must
NOT start with zero!
www.msealarms.com.au
