NESS D8X / D16X DELUXE CONTROL PANEL – USER'S MANUAL
17
The Ness D8x and D16x have a Temporary Day
Zone feature which allows easy and flexible Day
Zone selection and operation.
Temporary Day Zones operate in addition to
Permanent Day Zones which are usually setup
by the installer.
While remaining in normal operating mode,
Zones’.
As an extra feature, the user can easily enable
or disable Day Mode, (which includes both
Temporary and Permanent Day Zones).
Day Zones can be programmed by your installer
to beep the keypad, or briefly sound the siren/s
or flash the strobe light, or to sound an optional
sufficient warning in most situations).
TYPICAL APPLICATIONS
Day Zones are useful for a variety of applications
such as a shop door beeper, triggered by a reed
switch on the door.
For example, in a shop you could enable Day
Mode to alert you when a customer enters the
front door.
You can also enable additional Temporary Day
Zones to monitor switches on, for example, the
rear door or the fridge doors.
COMMANDS
(Accessed from normal operating mode).
Enter Selection Mode.
+
Press
P
followed by
E
when in operating
mode to enter Temporary Day Zone selection
mode.
Zone Selection.
[Zone No.]
+
Permanent Day Zones, (installer option
P53E), are not displayed in selection mode.
Permanent Day Zones can be selected as
Temporary Day Zones but this has no effect
Exit Selection Mode.
Saves changes and returns to normal
operating mode.
Enable Day Mode.
+
This enables/disables both Temporary and
Permanent Day Zones.
When Day Mode is enabled, any unsealed
output for 2 seconds. When Day Mode is
be indicated on the keypad as an unsealed
The MONITOR icon flashes continuously
when Temporary Day Mode is enabled.
TEMPORARY DAY ZONES
www.msealarms.com.au
