NESS D8X / D16X DELUXE CONTROL PANEL – USER'S MANUAL
20
PROGRAMMING
Programming your Ness D8x or D16x is a simple
process using the keypad.
To enter program mode you need to know your
Master Code, which is user code number 1, (see
the table on the next page).
TO ENTER PROGRAM MODE
press
+
[M
ASTER
C
ODE
]
+
If you forget your Master Code it can be reset
by your installer.
The factory default
Master Code is:
123
TO EXIT PROGRAM MODE
press
+
The panel will automatically exit Program Mode if
the keypad is inactive for 4 minutes.
USER CODES
The panel has 56 user codes which can be
operated by keypad code (3-6 digit PIN), by
optional radio key or by optional access cards.
To add, change or delete a keypad code, follow
the steps on page 22.
The factory default Master Code is 123. You
should re-program this code with a new code
of your own choice.
TIMERS
You can also re-program the Entry Delay Time
and Exit Delay Time if you need more or less
time to exit and enter the premises.
REAL TIME CLOCK
Some features such as AutoTime rely on the
onboard Real Time Clock. Set the current
date and time to ensure events take place as
expected.
You will need to adjust the Hours setting when
Daylight Savings starts and ends.
TELEPHONE NUMBER
If your panel is programmed for Audible
Monitoring, the panel's dialler will make alarm
calls to the Primary and Secondary telephone
numbers programmed by your installer.
If a
‘Follow Me’ Telephone Number
is
programmed, the Primary and Secondary
telephone numbers will be ignored. All Audible
Alarm calls will be sent to the Follow Me
telephone Number.
This is handy if you, for example, stay at a
relative's house overnight and you want the
panel to call you there in the event of an alarm.
When you delete the Follow Me Telephone
Number, alarm calls will again be made to the
Primary and secondary telephone numbers.
If your Ness panel is monitored by a Central
Station, the Follow Me number is ignored.
For all other programming changes, talk to
your installer.
www.msealarms.com.au
