Ness Security Products 5000 SERIES Скачать руководство пользователя страница 3

Страница: 3 / 17

****************************************************************************************************

The 5000 SERIES 8 Zone Control

Unique dynamic input system which will

Panel is one pan of an integrated range

detect any component failure of the

of equipment.

zone input circuitry and generates an
alarm.

4 Access codes.

ALL inputs and outputs are heavily

Monitor mode (partial Arming). Simple

protected against lightning and high

operation allows selected zones to be

voltage power supply transients. An

Armed while others are ignored. Ideal

earth terminal is provided for extra

for monitoring doors and windows

protection.

while you are safe inside.

TRUE DYNAMIC BATTERY TEST under

Additional security is provided by the

load, every hour and when Arming the

various programming options:

panel. Your system will warn you in
advance of possible battery failure.

- Arm via a code

Works irrespective of whether the
mains is on or off.

- Exclude zones via a code

A large 6.5 A-H backup battery and a

- Indication of zones that are unsecured

1.4 amp plug-pack transformer provides

when arming.

more than sufficient current to maintain
the operation and security of the entire

Special interface to allow the

system, even under full alarm

connection of NESS Remote Keypads

conditions.

which offer full programmability and
operation of the panel from a remote

The mains input is constantly

location.

monitored. A warning is given when the
mains is disconnected.

Unique keyswitch input to allow simple
remote operation of the Control Panel.

Audible warnings to indicate trouble
when Arming.

Easy connection of the 5000 SERIES
Satellite Siren to greatly increase the

Comprehensive Memory Mode for easy

security of your system.

retrieval of important events such as
Primary Alarms, Secondary Alarms,

The Control Panel housing has 4

Tamper Alarms, Low Battery and Mains

separate tamper systems - Keypad,

Fail.

Wall, Lid and Panel impact. The panel
impact tamper system protects against

All Programming data is permanently

control panel intrusion by heavy

stored in secure non-volatile EEPROM.

impacts. These tampers are protected
24 hours a day.

Different siren sound for 24-hour
alarms

Outputs are separately fused.

Содержание 5000 SERIES


















Результаты поиска

Содержание 5000 SERIES

Отзывы:

Похожие инструкции для 5000 SERIES

Бренды по названию

Популярные бренды

Ness Security Products 5000 SERIES, Инструкция по эксплуатации

Результаты поиска

Содержание 5000 SERIES

Отзывы:

Похожие инструкции для 5000 SERIES

Бренды по названию

Популярные бренды