9
ZONES TO BE MONITORED
******************************************************************************************************
Any zone can be selected for operation in
To program, say, zones 3 and 4 to be
Monitor mode. However, do not select a zone
Monitor zones, enter,
that has been installed to generate a 24 hour
alarm (eg. Fire Detector).
P8E 2E 3E 4E
To remove a zone from the Monitor mode
As each zone is programmed, the
selection, re-enter the zone number.
corresponding zone light is illuminated (if it was
previously off). If the zone light was previously
on, it will be extinguished, thus de-selecting that
zone from Monitor mode.
To VIEW Zones to be monitored ENTER
To CHANGE zones to be monitored ENTER
(PROG) (8) (END)
(ZONE NUMBER) (END)
ZONES TO CONTROL THE AUXILIARY OUTPUT
******************************************************************************************************
The 8 Zone Control Panel provides an Auxiliary
To program, say, zones 4, 6 and 8 to control
output which can be turned on and off by ANY
the Auxiliary Output, enter:
selected zones or via the keypad. This output
can be used for a variety of applications. Talk
P9E 4E 6E 8E
to your security installation company about
your specific requirements.
As each zone is programmed, the
corresponding zone light is illuminated (if it was
A zone programmed for Auxiliary will cause the
previously off). If the zone light was previously
Auxiliary Output to turn on when it becomes
on, it will be extinguished, thus de-selecting
unsecured, regardless of whether the Panel is
that zone.
Armed or Disarmed.
The output can also be turned on or off
To remove a zone from the selection, re-enter
(toggled) by pressing 9 E while Disarmed or
the zone number of the zone to be removed.
in Monitor mode.
To VIEW Auxiliary Zones ENTER
To CHANGE Auxiliary Zone(s) ENTER.
(PROG) (9) (END)
(ZONE NUMBER) (END)
PROGRAMMING SUMMARY
******************************************************************************************************
DESCRIPTION
OPTION
DEFAULT
PROGRAMMED
Code 1
P1E code E code E
Code 2
P2E code E code E
Code 3
P3E code E code E
Code 4
P4E code E code E
Entry Delay Time
P5E time E
20 secs
(1-99)
Exit Delay Time
P6E time E
60 secs
(1-99)
Monitor Type
P7E type E
Type 2
(1-4)
Monitor Zones
P6E zone E
All Zones
(1-8)
Aux Output Zones
P9E zone E
All Zones
(1-8)
