Neptune Technology TRICON SmartTrol, Руководство по установке и обслуживанию

Страница: 77 / 90

TRICON
®
SmartTrol
™
Installation and Maintenance Guide
65
Appendix D: Register Tracking
This chapter provides information on register tracking.
Making the Total Agree with the Register
After programming the SmartTrol™ with the appropriate K Factor and operating
parameters, you can set the SmartTrol so the value of Total agrees with the current
quantity indicated on the meter register. However, the meter must be static for the
duration of the following procedure. Either stop the flow through the meter or remove the
register from the meter until the procedure is complete.
Note the current register reading.
Overview of the Procedures
This section provides an overview of the procedures to make the total agree with the
register.
l
Set the SmartTrol to Set to Preset (count down mode).
l
Set Preset A to the register reading value.
l
Tap CLR to reset to Preset.
l
Reset the SmartTrol to zero (count up mode).
Preparing the SmartTrol™ to Accept the Current Register Reading
The following table provides information on how to prepare the SmartTrol to accept the
current register reading.
Tap Display
D MENU (Displays 1 second).
DEV TYPv.
ENT RTv CNTv
Table 31 – Accepting Current Register Reading