Neptune Technology TRICON SmartTrol, Руководство по установке и обслуживанию

Страница: 53 / 90

Code Description
KD COMMAND TO TRANSMIT RATE KFactor B
KD (S) XXX COMMAND TO LOAD RATE K Factor B WITH XXX.
PA COMMAND TO TRANSMIT PRESET A.
PA (S) XXX COMMAND TO LOAD PRESET A WITH XXX.
PB COMMAND TO TRANSMIT PRESET B.
PB (S) XXX COMMAND TO LOAD PRESET B WITH XXX.
RC COMMAND TO RESET THE COUNTER (TOTAL)
(set to PRESET if in the count down mode.)
RC (S) XXX COMMAND TO SET COUNTER (TOTAL) TO XXX.
RT COMMAND TO RESET GRAND TOTAL TO 0.
RT (S) XXX COMMAND TO SET GRAND TOTAL TO XXX.
Table 17 – Command Code Definitions (continued)
Example: Unit Number 1
This section provides an example of the SmartTrol's response to the command codes.
Host Command SmartTrol Response
D1 (S) Device # 1:
PA (S) 76546 (S) PA (S) PA 76546 PA (Keystrokes echo).
KC (S) 1575 (S) KC (S) KC 1575 KC (Keystrokes echo).
RC (Enter)
l
RC (Keystrokes echo, request processed).
l
76546 (New Preset A value).
l
1575 (New rate K Factor for Input A).
Table 18 – Example: Unit Number 1
See Appendix B on Page 55 for a sample communications program written in BASIC. .
TRICON
®
SmartTrol
™
Installation and Maintenance Guide
41
Chapter 11: RS-232C Serial Communication Operations