POC-100 User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 57 of 65
BIOS settings. Please refer to section 3.6 for instructions of using WOL function.
To enable/disable “Wake on LAN” option:
1. When POC-100 boots up, press F2 to enter BIOS setup utility.
2. Go to [Power].
3. Enable/disable the [Wake on LAN] option according to your application.
Watchdog Timer for Booting
The BIOS of POC-100 has a useful feature which allows users to use the watchdog timer to
secure the booting process. You can specify the timeout value for watchdog timer. Once the
watchdog timer expires, the BIOS issues a reset command to initiate another booting
process. You can also set the behavior of how to stop the watchdog timer. There are two
options in BIOS menu, “Automatically after POST” and “Manually after Entering OS”. When
“Automatically after POST” is selected, the BIOS automatically stop the watchdog timer
after POST (Power-On Self Test) OK. When “Manually after Entering OS” is selected, it’s
user’s responsibility to stop the watchdog timer when entering OS. This guarantees the
system can always boot to OS, otherwise another booting process will be initiated. For
information about programming watchdog timer, please refer to Appendix A Using H/W
Watchdog Timer.
To set the watchdog timer for boot in BIOS:
1. When POC-100 boots up, press F2 to enter BIOS setup utility.
2. Go to [Boot] menu.
