POC-100 User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 17 of 65
Pluggable Terminal Block on POC-100ST Only
The 2-pin pluggable terminal block on POC-100ST is fit for field usage where DC power is
usually provided. It accepts a wide range of DC power input from 8 to 25V. And the screw
clamping connection of terminal block gives a very reliable way for wiring the DC power.
The following table describes the pin definition of the pluggable terminal block. For detail
information of connecting DC power, please refer to section 3.5.
Pin
Description
V+
Positive polarity of DC power input.
V-
Negative polarity of DC power input (usually power ground).
Caution
Please make sure the voltage and polarity of DC power is correct before you connect it to POC-100.
Supplying a voltage over 25V will damage the system..
